SABER UCV >
1) Investigación >
Artículos Publicados >

Por favor, use este identificador para citar o enlazar este ítem: http://hdl.handle.net/10872/11532

Título : HMS mesoporous silica as cobalt support for the Fischer–Tropsch Synthesis: Pretreatment, cobalt loading and particle size effects
Autor : Lira, Estephanía
López, Carmen M.
Oropeza, Freddy
Bartolini, Mónica
Alvarez, Juan
Goldwasser, Mireya
López Linares, Francisco
Lamonier, Jean-Franc¸ois
Pérez Zurita, M. Josefina
Palabras clave : Fischer–Tropsch Synthesis;
Cobalt;
HMS; Diesel
Fecha de publicación : 21-Jul-2015
Resumen : The use of mesostructurated materials as cobalt support for the Fischer–Tropsch Synthesis (FTS) has taken increasing importance in the last decade. However, little use has been made of the hexagonal mesoporous silica (HMS), as most of the work has been reported for Co/MCM-41 and Co/SBA-15 catalytic systems. The effect of cobalt loading, impregnation method, particle size and pretreatment, on the catalytic properties of cobalt supported on HMS catalysts for the Fischer–Tropsch Synthesis have been studied. Catalysts were synthesized by incipient wetness impregnation, using an aqueous solution of hexahydrated cobalt nitrate as precursor salt. Additionally, a series of catalysts was prepared using an ethylene diamine cobalt complex which enabled cobalt nanoparticles formation. All catalysts were characterized by X-ray diffraction (XRD), temperature programmed reduction (TPR), chemical analysis and nitrogen adsorption. Calcination pretreatment has great influence in the catalytic behavior of the cobalt catalysts. All the catalysts prepared showed high C5 + fraction selectivity, specifically towards the diesel fraction. The use of HMS as cobalt catalyst support for the Fischer–Tropsch Synthesis seems to be very promising. When SiO2 is used as support, C5 + hydrocarbons distribution shows a marked tendency towards C19 + fraction, while when HMS is used, the diesel fraction is favored. This result leads to the conclusion that the HMS pore structure produced a chain growth hindrance, tailoring the product distribution towards the diesel fraction.
URI : http://hdl.handle.net/10872/11532
ISSN : 1381-1169
Aparece en las colecciones: Artículos Publicados

Ficheros en este ítem:

Fichero Descripción Tamaño Formato
MOLCAA6997[1].pdf678.95 kBAdobe PDFVisualizar/Abrir

Los ítems de DSpace están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.

 

Valid XHTML 1.0! DSpace Software Copyright © 2002-2008 MIT and Hewlett-Packard - Comentarios