SABER UCV >
1) Investigación >
Artículos Publicados >

Por favor, use este identificador para citar o enlazar este ítem: http://hdl.handle.net/10872/14186

Título : Use of aluminophosphate molecular sieves in CO hydrogenation
Autor : Cubeiro, M. Luisa
López, Carmen M.
Colmenares, Alicia
Teixeira, Luisa
R. Goldwasser, Mireya
Pérez Zurita, M. Josefina
Machado, Francisco
González Jiménez, Fernando
Palabras clave : Syngas conversion
Fischer-Tropsch synthesis
Carbon monoxide hydrogenation
FAPO
SAPO
CoAPO
Fecha de publicación : 4-Oct-1997
Editorial : Applied Catalysis A:General
Citación : Applied Catalysis A:General 167 (1998) 183-193
Resumen : The behaviour in syngas conversion of Me/AlPO4-5 and MeAPO-5 (Me=Fe,Co,-4wt%), as well as that of hybrid systems comprising an iron Fischer-Tropsch (FT) catalyst physically mixed SAPO-5, FAPO-5, SAPO-11 and FAPO-11, was studied at 1.2 MPa, 573 K and H2/CO=1. Conversion of CO was much lower for FE/AlPO4-5 and MeAPOs than for Co/AlPO4-5, which could be related to the presence of the metal in high-oxidation states on the former. Significant differences in selectivity were observed as a result of changes in the type of metal and in the way that the metal is introduced in the catalyst (added to the synthesis gel or impregnated on the molecular sieve). These differences in selectivity were explained in terms of the facility of forming alkenes (related to metal sites) and the presence of acid sites. Alkenes formed on the FT catalyst underwent oligomerisation, cracking, skeletal isomeritation and hydrogen transfer reactions in the presence of the physically mixed SAPO-5 and FAPO-5. Double bond shift and skeletal isomeritation were the only alkene transformations observed on the mixtures of FT with AEL-like catalysts (FT-FAPO-11 and FT-SAPO-11). Desactivation of acid sites with time-on-stream was evidenced for the physical FT-molecular sieves mixtures. However, their higher selectivity toward light hydrocarbons, as compared to that in the absence of molecular sieves, presisted. It was observed that the FAPO phase (FAPO-5 or FAPo-11) added to the FT catalyst led to an increase in the syngas conversion, probably due to the participation of iron- species associated with the molecular sieves.
URI : http://hdl.handle.net/10872/14186
Aparece en las colecciones: Artículos Publicados

Ficheros en este ítem:

Fichero Descripción Tamaño Formato
Al-P-App Catal Vol 167.pdf753.26 kBAdobe PDFVisualizar/Abrir

Los ítems de DSpace están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.

 

Valid XHTML 1.0! DSpace Software Copyright © 2002-2008 MIT and Hewlett-Packard - Comentarios